HOZAN Tournevis（Single Product/Set Classification：Unité）
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
- En promotion
Alésoir conique K-441 / K-442 / K-443 / K-444
HOZAN
A taper reamer that boasts outstanding sharpness and durability.
[Features]
· K-441, K-442, K-443 and K-444 are available.
· Can be used in various applications according to the hole diameters and taper angles.
· Perfect for work that requires application of torque as it comes with a handle.
· Allows cutting by rotating clockwise.
· Excellent sharpness and outstanding durability.
[Applications]
· Ideal for modification and enlargement of holes in metal plates, aluminum plates, thin iron plates, etc.- Remise sur volume
à partir de∗ ： 13.15 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Broche étau K-501
HOZAN
Vise driver for grasping small diameter drills and rotating them, and grasping pin (rod) shaped objects securely.
[Features]
· Features a rotary head with embedded ball bearings, which offers great workability.
· Vise for small diameter drills with rotating cap.
· It can be smoothly rotated while pushing in the vertical direction.
· With non-slip knurled grip, it is unlikely to slip and easy to rotate. It also has a thick body that makes it easy to apply force.
· It has built-in collets with 4 sizes that can be exchanged to correspond to a wide range of drill diameters.
· The inner collet and main body are throughcut, allowing even long objects to be inserted and fixed to the back depending on the diameter.
[Applications]
· It can also be used for etching by grasping a needle (probe), etc.- Remise sur volume
à partir de∗ ： 26.46 € Délai d'expédition minimum ： 8 jours *Prix unitaire/configuration de base
-
Tournevis à impact D-963
HOZAN
Impact screwdriver that can be switched between left and right rotation.
[Features]
· Rusted screws can be loosened easily by hitting it with the hammer as the screwdriver bit rotates at high torque.
· It uses a flanged protective grip that protects the hand.
· Removing the bit holder allows a 12.7 mm square socket to be attached.
· Case included.
[Applications]
· Ideal for turning screws, etc. that take effort to loosen.- Remise sur volume
à partir de∗ ： 4.54 € Délai d'expédition minimum ： 8 jours *Prix unitaire/configuration de base
-
Broche étau K-502
HOZAN
Fine drill pin vise for applications including but not limited to grasping small diameter drills and rotating them, including grasping pin (rod) shaped objects securely.
[Features]
· As the main body is compact, it is easy to see the work at hand.
· Also, there is less load in continuous work as it is a light finish.
· Body is rather thick which makes it easy to apply force, and it has line knurling which makes it anti-slip and easy to turn.
[Applications]
· It can also be used for drilling on precision parts and substrates, for plastic models, for etching by grasping a needle (probe), etc.
· A fixed-type collet, body-integral, compact single-head type.- Remise sur volume
à partir de∗ ： 11.55 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Tournevis d'électricien avec DEL, D-745
HOZAN
An LED type inspection screwdriver with high visibility.
[Features]
· Batteries can be changed.
· Applicable ranges: 100 to 240 VAC, tip size of 2.5 x 0.6 mm, total length of 139 mm, shaft length of 17 mm, shaft diameter of 2.5 mm.
· Handle diameter 16 mm, weight 23 g.
· Be sure to check the light before use.
· Be careful of short circuit and electric shock.
[Applications]
· Used for determining AC polarity and checking electrical conductance.
· Can be used within the applicable range.- Remise sur volume
à partir de∗ ： 14.15 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
| |
| Marque | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN |
| Série du produit | |||||
| à partir de∗ | 13.15 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 26.46 € *Prix unitaire/configuration de base Remise sur volume | 4.54 € *Prix unitaire/configuration de base Remise sur volume | 11.55 € *Prix unitaire/configuration de base Remise sur volume | 14.15 € *Prix unitaire/configuration de base Remise sur volume |
| Délai d'expédition minimum ： | Jour même | 8 jours | 8 jours | 7 jours | 7 jours |
| Tip standards | Autre | - | Phillips (+) / Tête plate (-) | - | Tête plate (-) |
| Tip size / Phillips (+) | - | - | N° 2 / N° 3 / N° 4 | - | - |
| Tip size / flathead (-) blade width (mm) B1 | - | - | 8 ～ 10 | - | 2.5 |
| Shaft length L (mm) | - | - | - | - | 17 |
| Single Product/Set Classification | Unité | Unité | Unité | Unité | Unité |
| Shaft type | - | - | - | - | Rond |
| Magnet | - | - | N/A | - | N/A |
| Shaft through | - | - | - | - | N/A |
| Bolster | - | - | - | - | N/A |
| Grip Type | Acier inoxydable | - | - | - | Résine |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | - | 0.6 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - |
Loading...
Filtrer par:
Stock
-
- Stock Items Included
Affiner la recherche en précisant les spéc./dim.
-
Tip standards
- Phillips (+)
- Tête plate (-)
- Phillips (+) / tête plate (-)
- Torx
- Boîte
- Hexagone
- Bille
- Combinaison
- Autre
-
Tip size / Phillips (+)
- N° 000
- N° 00
- N° 0
- N° 1
- N° 2
- N° 3
- N° 4
- Autre
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
-
Single Product/Set Classification
- Unité
- Produit du jeu
-
Shaft type
- Rond
- Carré
-
Magnet
- Disponible
- N/A
-
Shaft through
- Disponible
- N/A
-
Bolster
- Inclus
- N/A
-
Grip Type
- Résine
- Poignée en bois
- Caoutchouc
- Acier inoxydable
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Affiner la recherche en spécifiant le fabricant
-
- PB SWISS TOOLS (32)
- MAEDAKINNZOKU (25)
- ANEX (23)
- TRUSCO NAKAYAMA (17)
- KTC(KYOTO TOOL) (14)
- ENGINEER (7)
- SK 11 (6)
- HOZAN (5)
- WERA (4)
- SUNFLAG (3)
- HIRAI KOGU (2)
- SMATO (2)
- SIGNET (2)
- WIHA (2)
- EIGHT TOOL (1)
- SUEKAGE TOOL (1)
- AS ONE (0)
- HANDIWORK (0)
- MATADOR (0)
- PROXXON (0)
- RITTAL (0)
- WOLFCRAFT (0)
- E VALUE (0)
- WEIDMUELLER (0)
- OSG (0)
- TRAD (0)
- BAHCO (0)
- VESSEL (0)
- BERNSTEIN AG (0)
- HAZET (0)
- KNIPEX (0)
- PHOENIX CONTACT (0)
- GEDORE (0)
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Catégories relatives à « Tournevis »
-
- Clés / clés polygonales /clés à cliquet
- Clés à six pans
- Clés anglaises
- Clés Torx
- Clés à douille
- Tournevis
- Pinces/tenailles
- Ensembles d'outils / boîtes à outils
- Embouts de tournevis
- Brucelles
- Outils d'entretien automobile
- Outils de plomberie et de climatisation
- Outils pour la tôle
- Outils destinés aux installations électriques
-
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.