Tableaux / armoires / boîtiers（Plaque intermédiaire：Sans circuit imprimé）

?* À propos du délai d'expédition et des prix

• 

  Boîte plastique avec protecteur en silicone TWS

  TAKACHI ELECTRONICS ENCLOSURE

  An elastic protector that protects critical internal equipment from falling impacts.
  
  [Features]
  - A small general-purpose plastic case with silicon protector
  - The flexible, slip-resistant cover protects equipment from falling impacts.
  - 11 types in total; available in a choice of 18 colors.
  - Internal case material: Cases with the color-codes B (black) and G (light gray) are made from ABS resin (UL94HB). Cases with the color-code W (off-white) are made from flame-retardant ABS resin (UL94V-0).
  - Note that the material varies according to the color code.
  - Screw the silicon protector and plastic case together at the joint.
  - Do not over-tighten the screw; this will cause the screw to bite into the silicon.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	9.06 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîte de commande inclinée, série CF

  TAKACHI ELECTRONICS ENCLOSURE

  Sloped Control Box (CF)
  
  [Features]
  - The clean design features a 10° slope which makes operation easy.
  - The panel structure includes both screw clamp and inlay options, either of which can be used as the front.
  · Machining is easy because of the flat plate.
  - The product is extremely lightweight, with the side plates employing flame retardant ABS resin (UL94V-0) and the frame employing extruded aluminum.
  - The product can be mounted in any position due to the sticky rubber legs.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	25.35 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîte plastique portative, série LC

  TAKACHI ELECTRONICS ENCLOSURE

  Handheld Plastic Case (LC)
  
  [Features]
  - This handheld case features a sharp design, including tapered elements.
  · The case material is flame retardant ABS resin (UL94V-0).
  · Allows for 8 battery configurations: 2 AA batteries, 3 AA batteries, 4 AA batteries, 2 AAA batteries, 3 AAA batteries, 4 AAA batteries, one 006P (9 V) battery, or no batteries.
  ▪ Includes battery terminal symbols (⊕ and ⊖).
  - Can be used for a variety of hand-held equipment including measuring instruments, detection instruments, communications devices, and medical devices.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	4.54 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîtier en fonte d'aluminium, série TD

  TAKACHI ELECTRONICS ENCLOSURE

  Aluminum Die Cast Box (TD)
  
  [Features]
  · 39 models with 13 sizes and 3 types of color specifications are available.
  · Box with superior impact resistance.
  · Thin and clean design with corner R.
  · Unprocessed N type can also be used as a conduction box.
  · Small, round design.
  · Available unprocessed and in standard colors, with 2 types of paint finish (light gray and black).

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	11.66 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte plastique, série SY

  TAKACHI ELECTRONICS ENCLOSURE

  Plastic Case (SY)
  
  [Features]
  - Flat-plate panels make machining easy.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	13.07 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîte Omni modèle CU-N

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · The cover is made of iron and the chassis is a standard electronics case made of colored aluminum.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	18.95 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Steel Terminal Block Box, with Lid Model DIN Rail

  MISUMI

  Relay box with DIN rail model

  • Remise sur volume

  • Grande quantité possible (D-JIT)
  • Space-saving
  • Steel
  • Fixed Size

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	60.35 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Steel Terminal Block Box, with Door Model DIN Rail

  MISUMI

  Door-model relay box with DIN rail

  • Remise sur volume

  • Grande quantité possible (D-JIT)
  • Space-saving
  • Steel
  • Fixed Size

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	75.57 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Série BOXTM-200□

  TOYO GIKEN

  [Features]
  · Uses highly durable and chemically resistant PBT (UL94-0) in its insulation materials outside the box main body.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	42.30 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîte en aluminium petit format, série KC

  TAKACHI ELECTRONICS ENCLOSURE

  Small Aluminum Case (KC)
  
  [Features]
  · The KC Series is a series of cases that use aluminum extrusion materials in their bodies, ABS resin in their panels, and have corners with R.
  · The combination of ABS resin and aluminum extruded materials makes for lightweight cases.
  · Panels are stepped at 0.75 mm, which allows for attachment of laminate film.
  · Assembled structure gives it superior workability.
  · Optimal as a hand-type case.
  · 3 types of color specifications are available: light gray and silver/black and silver/black and black.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	13.71 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte UM3 / UM4 avec compartiment de batterie UM3, série LM

  TAKACHI ELECTRONICS ENCLOSURE

  UM3/UM4 Case with UM3 Battery Box (LM)
  
  [Features]
  · Small battery case, for easy battery replacement.
  · Flame-retardant ABS resin (UL94V-0).
  · Drop-fit cover top surface makes it suitable for numerous applications, such as touch panel sheet attachment.
  · Case thickness has been kept to a minimum, making it optimal for portable equipment.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	10.74 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîte métallique, série SRDSL

  TAKACHI ELECTRONICS ENCLOSURE

  Metal Case (SRDSL)
  
  [Features]
  · The SRDSL Series is a series of aluminum chassis that are suited for vacuum tube stereo power amplifiers and tabletop control boxes.
  · The top panel has a high-quality hairline alumite finish, and is available in 2 colors: champagne gold and silver.
  · The main body frame has a welded aluminum integrated structure, making it lightweight and easy to assemble.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	108.01 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Boîte à crémaillère EIA série YER

  TAKACHI ELECTRONICS ENCLOSURE

  EIA rack case (YER)
  
  [Features]
  - Stronger panels on the YER series; effective width is now 424 mm.
  - More effective area inside the case provided.
  - Panels available in 2 colors: silver and black.
  - EIA standard rack case with panels, sides and top and bottom plates made of aluminum. Assembly makes machining, silk printing, and carving easy to perform.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	89.87 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîte plastique portative, série GHA

  TAKACHI ELECTRONICS ENCLOSURE

  Hand-Held Plastic Case (GHA)
  
  [Features]
  - Handheld plastic case available in a total of 11 sizes.
  - Models that accommodate storage of AA, AAA and 9V batteries are available.
  - Two colors are available: white gray and black.
  - Ideal for use with small handheld wireless communications devices and measuring instruments.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	4.96 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîte plastique, série KW

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Plastic case (KW)

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.95 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîte plastique avec couvercle en silicone, série LCS

  TAKACHI ELECTRONICS ENCLOSURE

  Plastic Case with Silicon Cover (LCS)
  
  [Features]
  - Handheld case with silicon cover.
  - The flexible non-slip cover therefore protects devices from falls.
  - Internal case is flame retardant ABS resin (UL94V-0).
  - 8 battery configurations: 2 AA, 3 AA, 4 AA, 2 AAA, 3 AAA, 4 AAA, one 006P (9 V), and no batteries.
  - ⊕ and ⊖ battery terminal symbols included.
  - Use on a variety of hand-held equipment, including measuring instruments, detection instruments, communications devices, and medical devices.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	8.85 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Coque de téléphone portable, série PU

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  - Mobile Phone Case (PU)

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	75.83 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîte à crémaillère EIA, série RUS

  TAKACHI ELECTRONICS ENCLOSURE

  EIA Rack Case (RUS)
  
  [Features]
  · Functionally oriented tack case.
  · Has a simple structure and the front panel can be removed while stored on a rack.
  · Two colors are available for the panel and mounting bracket: beige and black.
  · Usable height can be expanded by reversing the chassis.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	100.39 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîtier en plastique à mécanisme d'ouverture et de fermeture simple pression, série SU

  TAKACHI ELECTRONICS ENCLOSURE

  One-Touch Openable/Closeable Plastic Case (SU)
  
  [Features]
  · This case features a soft and curvy design.
  · A new white model which is suited for indoor installation is now available.
  · Perfect for use as a wall mounted case.
  · A one-touch openable/closeable structure.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.19 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Boîte fine, série YM

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Thin case (YM)

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	8.25 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîtier de modules DIN avec fenêtre d'ouverture et de fermeture, série H53

  TAKACHI ELECTRONICS ENCLOSURE

  Opening and Closing Window DIN Module Box
  
  [Features]
  - This box is designed specifically for DIN rail (35-mm) mounting.
  - Assembly and disassembly is possible without the use of screws.
  - Three different front panel types can be selected, depending on the intended application.
  - Attachment of a mounting base or printed baseboard to the inside is possible.
  Neither a mounting base nor printed baseboard are included.
  - PPO material conforming to UL94V-0 standards is included.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	17.09 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte en aluminium à refroidissement naturel par air, petit format, série HIT

  TAKACHI ELECTRONICS ENCLOSURE

  Natural Air Cooled Small Aluminum Case (HIT)
  
  [Features]
  · The HIT series includes natural air cooled cases which use heat sink shaped extruded aluminum as a body material.
  · The clean design features R on the corners.
  · The case is sturdy due to its extruded aluminum structure.
  · Also ideal for use as an HDD case / digital audio case.
  · Two color specifications are available: silver and black.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	52.66 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîtier plastique avec couvercle supérieur amovible, série PR

  TAKACHI ELECTRONICS ENCLOSURE

  Removable Top Cover Plastic Box (PR)
  
  [Features]
  · Extremely cleanly-designed plastic box with tapered corners.
  · Top cover detachable even when attached to a wall, making maintenance simple.
  · Use on desks with the top cover surface facing down.
  · The cover mounting screws are secured using insert nuts enabling repeated opening/closing and providing a sturdy structure.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.59 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîtier mobile, série PT

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  ∙ Case for mobile phone. (PT)

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	74.95 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîte inclinée, série TS

  TAKACHI ELECTRONICS ENCLOSURE

  Sloped Case (TS)
  
  [Features]
  · Chassis employs SPCCt1.0 black paint for TS-4 only.
  · Included screws correspond to M3 × 6 binding screws.
  · Cover / chassis one-sided protective sheet included (however, no protective sheet is included for the TS-4).

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	24.45 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Unité pour carte de bornes à crémaillère EIA, série UT

  TAKACHI ELECTRONICS ENCLOSURE

  EIA Rack Terminal Board Unit (UT)
  
  [Features]
  - A multipurpose terminal board unit.
  - By combining it with the optional panel and mounting it, you can build a unit to fit the application.
  - The panel/unit panel mounting bar has a 50 mm pitch and is movable, which lets you change the depth.
  · Has a simple structure and the front panel can be removed while stowed on a rack.
  - Panels and sideboards feature two colors: beige and black.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	107.56 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîte de commande, série CH

  TAKACHI ELECTRONICS ENCLOSURE

  Control Box (CH)
  
  [Features]
  · The design is sturdy and clean thanks to the use of die-cast aluminum and extruded aluminum.
  · The side plate features a powder coating that confers excellent coating strength.
  · The panel structure includes both screw clamp and inlay options, either of which can be used as the front.
  · Also, machining is easy because of the flat plate.
  · Two color specifications are available and can be used depending on the intended application.
  · The product can be mounted to any arbitrary position due to the sticky rubber legs.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	38.95 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte de dissipation thermique, série HEN

  TAKACHI ELECTRONICS ENCLOSURE

  Heat Dissipation Case (HEN)
  
  [Features]
  · Surface treatment offers hair line processing with a luxurious feel and superior design characteristics
  · Natural air-cooled case with heat sink shape that accommodates heating countermeasures.
  · A total of 36 models in 18 sizes are available, including 6 different heights, 1 width and 3 different depths.
  · A very sturdy case made of aluminum extruded material.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	38.84 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîte en plastique retardateur de flamme, type TWF, avec pied à bride

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  • With flange foot eases installation.
  • 23 sizes of flame-retardant plastic cases, and available in two colors - off-white and dark gray.
  · Equipped with a boss for mounting on a circuit board.
  · May be used with a variety of devices, such as measuring instruments, communication devices, and controllers, etc.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2.05 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Type THA209, boîte de relais étanche à l'eau

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · This is a waterproof relay box which includes a terminal block and features an integrated cable gland and body structure.
  · Triple branching and quadruple branching types are available.
  · Work can be performed easily via screw-based connection of the terminal block.
  · Six different terminal elements are available: 3P, 5P, 8P, 3WP, 4WP and 3LP.
  · Compatible with cables of various wire diameters through use of an optional rubber bushing.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	28.51 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîte métallique type HU-N

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · The cover is made of iron and the chassis is a standard electronics case made of colored aluminum.

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	29.52 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Boîte type coque série GL

  SETTSU METAL INDUSTRIAL

  Simple yet standard plastic case for electric equipment that is available in many types and a wide array of sizes
  
  [Features]
  · Plastic case that is a simple, basic, shell type for electronic devices.
  · Uneven engaging configuration allows for secure meeting of parts.
  · The inside has a groove for vertically mounting a circuit board.
  · The boss for mounting on a circuit board is provided on the upper and lower covers.
  · Conforms to protection class IP65 by using the optional sealing kit.
  · The GM series with battery box is also available.
  · Can be used as an interface, switch box or modem as a peripheral device for measurement, control, medical and research applications.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	54.30 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Terminal Datec, série VEA

  SETTSU METAL INDUSTRIAL

  Plastic case for inclined electronic devices suited for input terminals.
  
  [Features]
  - This Datec terminal is a plastic case for electronic devices that can be used in a wide range of desktop applications.
  - This case was developed for data collection and is characterized by its high degree of diversity.
  - The ergonomically designed sloping angle of the operable part allows for easy operation and reading.
  - Boasts a easy-to-assemble structure which reduces assembly and maintenance time and costs.
  - All assembly screws are hidden in the covering trim, making them invisible from the exterior.
  - Designed with flat surface parts suited for boring.
  - Protection rating of IP54.
  - Can be used for a wide range of applications, including machinery operation, data collection, entry and security management, measurement and control, heating and air-conditioning controls, medical treatment, safety management, etc.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	136.71 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Carry Tech série VUA

  SETTSU METAL INDUSTRIAL

  [Features]
  - Easy-to-carry plastic case for electronic equipment with a handle.
  - The design incorporates a handle for a broader range of possible new usage applications.
  - The handle is positioned above the center of gravity line of the case for a well-balance product design. It provides ergonomically designed superior operability.
  - The handle pad uses flexible TPE material (elastomer) that feels comfortable to the touch and prevents slipping.
  - The back face of the case incorporates indentations that make it easy to maintain your grip when holding it in your hand while working.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	101.59 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîte de commande série T

  SETTSU METAL INDUSTRIAL

  [Features]
  · Steel control box.
  · The door is secured using a simple clasp lock.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	69.22 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...