Welding Wire for Stainless Steel WEL FCW 316LT
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
WEL-FCW-316LT-0.9-12.5
Informations de base
| Product Type | Fil de soudage | Wire Diameter(mm) | 0.9 | Current range, lower(A) | 120～130 |
|---|---|---|---|---|---|
| Current range, vertical position, elevating, upper | 60~80 | Arc Voltage Down Facing(V) | 26～29/24～27 | Arc Voltage Vertical Up Facing(V) | 21～24/20～23 |
| Amount Of Content | 1 Box (12.5 kg) | Features | WEL FCW 316LT is a flux-including wire for austenite stainless steel possessing low-carbon Mo, and as the quantity of carbon is low, the welding metal can be used as is, already welded, without grain boundary corrosion occurring. Therefore, it is appropriate for chemically corrosive environments such as with smoke desulfurization equipment, fertilizer plants, or food chemistry equipment, or in locations that require an high degree of corrosion-resistance, such as ocean environments. | Application | SUS 316、SUS 316L |
| Shield Gas Flow Rate(l/min) | 20 | Extension(mm) | 15~25 | (JIS) Equivalent standard | TS316L-FB0 |
| (AWS) Equivalent standard | E316LT0-1/4 | Chemical components C(%) | 0.023 | Chemical components Si(%) | 0.68 |
| Chemical components Cu(%) | 0.03 | Chemical components Mn(%) | 1.04 | Chemical components P(%) | 0.019 |
| Chemical components S(%) | 0.008 | Chemical components Ni(%) | 12.02 | Chemical components Cr(%) | 18.60 |
| Chemical components Mo(%) | 2.61 | Mechanical property (tensile strength)(Mpa) | 538 | Mechanical property (elongation)(%) | 40.2 |
| Mechanical property (0.2% yield stress)(Mpa) | 420 | Shield Gas | 100%CO2/80%Ar+20%CO2 | Mass(g) | 12500 |
Configurer
Propriétés de base
-
Type
- WEL FCW 316LT
Filtrer par jours d'expédition standard
-
- Tous les articles
- 9 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.